Oil tank removal is a complex process that should be done carefully and safely to protect the environment and protect your employees. There are many factors to consider before you begin the process of oil tank removal. Tank removal can be done by companies of all sizes, but it’s best to hire professionals who know the industry well and have experience doing oil tank removal.
Underground oil tank removal price usually costs $2,500 for a single tank. The average underground storage cost is much higher, since it needs to be dug up. Most above ground tanks will cost less to remove (since they don’t have to be dug). It is imperative that you get quotes from more than one company so that you can compare prices and fees.
Tank inspections are important. Tank inspection is done prior to each Oil Tank Removal Orange County NY removal to find out if anything has leaked or punctured the tank walls. This information is used for a variety of reasons, but mostly to make sure that there isn’t any more leaking oil. If any new tank installation has been made, this should also be noted. In addition, an inspection of the pump, flare and air control system is necessary to make sure that they are functioning correctly and there are no signs of damage.
An oil tank removal may be necessary if you discover a contaminated soil fill. The contaminated soil must be removed in a manner that does not contaminate the area where it is pumped. If contaminated soil is pumped into an already contaminated area, contamination can occur. It may not be visible right away, so it may take awhile for the contaminated soil to settle and become apparent. If contaminated soil is pumped into an area that is contaminated with oil, then the area must be sealed off until the contaminated soil can be cleaned up.
If you have an oil tank leak, then the best thing to do is patch it up the same day that it is discovered. This will help prevent any more oil tank leaks from occurring. This is also the most efficient way to make sure that an oil tank removal takes place.
When you discover an oil tank leak, one of the first things that you need to do is get rid of all the oil in the tank. You want to make sure that you don’t allow any more oil to leak out and cause an even bigger problem than the one that you started with. Before beginning any oil tank removal procedures, you must turn off the electricity to the tank. By doing this you will prevent any leaking that occurs because the electricity will shut off the pump and depressurize the area around it. After you have all of the oil drained from the tank and all the surrounding areas have been purified, then you can begin any oil tank removal procedures.
Removing oil tanks from underground storage tanks is actually very difficult. Oil Storage Tanks is made of concrete and are surrounded by a fence or some type of material to keep soil in and soil out. If the fence or material was built poorly then it may not be able to contain the amount of soil that is contained inside it. Another reason why removing an underground tank is so difficult is because the cement is generally thick and you would have to excavate very deep to break through it.
If you find oil tanks in your yard or on your property then you should call a professional ground tank removal company before doing anything yourself. Doing this on your own can cause a lot of damage to your lawn, landscaping and property. There are special tools and equipment used to break up thick concrete and underground storage tanks. A good contractor will use these tools to make sure that you don’t have to dig too much or break too much land up to get rid of your unwanted oil tanks.